Recommended for soft contact lenses, including silicone hydrogel lenses!
Conditioner for Biotrue™ conditioning, cleaning, protein removal, disinfection, rinsing and lens storage.
Wearing contact lenses, especially in a world of less sleep and increased computer use, is a challenge for eyes to stay healthy while maintaining a sense of comfort. To care for your eyes and lenses, we've created a lens care that works like your eyes. Biotrue Multifunctional Moisturiser moisturises just like your eyes. It does this using a humectant found in the human eye, with a pH adjusted to the pH of a healthy human eye. The Biotrue Multifunctional Conditioner helps prevent the denaturation of specific proteins in the eye, fights pathogens, ensuring clean lenses and a healthy lens wearing experience.
Follow these simple steps to condition, clean, remove and disinfect your lenses:
Step 1: Place at least 3 drops of Biotrue Multi-Purpose Solution on both sides of the lens surface and rub gently for 20 seconds.
Step 2: Rinse both sides of the lens thoroughly with Biotrue Multi-Purpose Solution for 5 seconds.
Biotrue multi-purpose solution. Soak your lenses for at least 4 hours. Remember to always use fresh solution - discard the solution from the case after each use.
Your lenses are ready to wear. If any debris remains on the contact lens, rinse with Biotrue Multipurpose Solution before insertion.
Always follow the instructions of your eye care professional. Based on your individual tear chemistry and lens wear schedule, your eye care professional may recommend additional products or procedures.
Do not store the lens in a simple saline solution instead of Biotrue.
The saline solution does not disinfect.
The lens should be cleaned and disinfected with Biotrue Multipurpose Solution before insertion.
Composition:Sterile, isotonic solution containing hyaluronan, sulfobetaine, poloxamine, boric acid, sodium borate, disodium edetate, and sodium chloride with 0.00013% dual-use polyamino propyl (polyamino propyl biguanide) and 0.0001% polyquaternium.
When used daily, Biotrue Multi-Purpose Solution dissolves protein, cleans, loosens and removes film, debris and deposits from the surface of soft contact lenses. Biotrue's multi-purpose solution helps prevent the formation of irritating deposits on the lens surface. It destroys harmful micro-organisms on the lens.
Biotrue multi-purpose solution can also be used to rinse lenses.
Biotrue benefits: the Biotrue multi-purpose solution works like your eyes. The Biotrue multi-purpose solution works like a healthy person's eye, moisturizing lubricant. Biotrue provides a multi-purpose solution that moisturizes the lenses for comfortable wear. Biotrue is a multi-purpose solution that helps prevent individual lens damage.
Proteins derived from denaturing clear lenses and inhibit the formation of deposits that can cause discomfort and shorten lens wear time. With hydrated and clear lenses, Biotrue makes wearing contact lenses comfortable all day long.
Biotrue is a solution that works like your eyes.
Biotrue multi-purpose solution can be used for daily conditioning, cleaning, de-whitening, rinsing, chemical (non-thermal) disinfection and storage of soft (hydrophilic) contact lenses, including silicone hydrogel contact lenses.
CONTRAINDICATIONS (reasons for use): Do not use if you are allergic to any of the ingredients.
It is important to follow the instructions of your eye care professional for the correct use of lenses and lens care products, including lens cases.
Eye problems, including corneal ulcers, can develop quickly and lead to vision loss. Contact lenses should not be worn at night or while sleeping. Clinical trials have shown that the risk of serious side effects is increased if these lenses are worn overnight.
If you experience eye discomfort, excessive tearing, vision changes, or blinking, remove the lenses immediately and contact your eye care professional immediately.
It is recommended that contact lens wearers have their eyes checked by a specialist twice a year or more often if instructed. To ensure proper lens disinfection and to reduce the risk of contact lens contamination,
the full recommended lens rub and rinse time should be observed. Reduced rubbing or rinsing time may not clean lenses properly
Each time you store lenses, refill the lens case with fresh solution and never use top-down or reusable solution. The lens should be discarded immediately after removing the lens from the lens case. Do not expose and store the lens or rinse the lens case with water such as tap, bottled or distilled, or any non-sterile solution.
Clean, rinse and dry the lens case each time it is removed. To allow excess solution to drain out, you can turn the lens case over while air drying. Replace the lens case frequently, depending on your hygiene habits.
If you do not dispose of the solution every time you use the lenses or water after taking care of the lenses, it can lead to contamination, which can cause eye injury and loss of vision. For more important safety information, please refer to the enclosed instructions.
IMPORTANT SAFETY INFORMATION:
- Always follow the instructions for use of the product. Failure to follow the product instructions may cause vision loss
- Visit your eye doctor regularly.
- Always wash and dry your hands before handling lenses.
- Do not use tap water, bottled water or saliva with lenses or lens cases.
- Only use fresh solution to clean and disinfect contact lenses.
- Always discard any solution left in the lens case after each disinfection cycle.
- Salt or rewetting drops will not disinfect lenses.
- Always replace solutions, lenses and lens cases according to the instructions.
- To avoid contamination, do not touch the tip of the container to any surface. Replace the cap after use
- Do not use for heat (thermal) disinfection.
- Always discard the solution from the lens case after each use.
- Keep the bottle tightly closed when not in use.
- Store the solution at room temperature.
- Use before the expiration date indicated on the can and bottle.
- Discard any remaining solution 90 days after opening.
- Keep out of the reach of children
ADVERSE REACTIONS (problems and things to do):
The following problems may occur: eyes stinging, burning or itching (irritation), less comfort than when the lens was first placed on the eye, some sensation in the eye (foreign body, scratched area), excessive watering (tearing) of the eye, unusual eye discharge, redness of the eye, reduced visual acuity (poor visual acuity), blurred vision, rainbows or halos around objects, photosensitivity (photophobia) or dry eye.
If you notice any of the above:
Remove the lens immediately.
If the discomfort or problem disappears, look carefully at the lens.
If the lens is damaged in any way, do not put the lens back on your eye. Put the lens back in its case and contact your ophthalmologist.
If there is dirt, eyelashes or other foreign matter on the lens, or if the problem disappears and the lens appears intact, clean, rinse and disinfect the lens thoroughly, then replace it.
If the problem persists, remove the lens immediately and consult your eye doctor.
Seek professional identification of the problem and immediate treatment to avoid serious eye damage.
Good lens care hygiene:
- Always wash and rinse your hands before handling lenses.
- Clean, rinse and disinfect lenses each time they are removed.
- To avoid mixing, always use the same lens first, right or left.
- Always empty and rinse the lens case with fresh Biotrue after use and allow to dry.